Thermal Management Systems
Since our formation in 1995, Technics has designed and built equipment for the conditioning of fuels, coolants, and lubricants used by researchers in the aerospace and ground vehicle applications. Later, we developed applications for thermal management in particle accelerators that required the treatment of radioactive water. These applications required a level of precision in control and measurement that is extraordinary in general and unprecedented in commercial facilities. Technics thermal management systems are now the trusted solution across these industries.
Beginning in 2026, we are using all of this experience to develop what will be the premier thermal management system for cooling data center AI servers in an immersed fluid with unparalleled efficiency and equipment protection.
Frequently Asked Questions
Are your electrical systems approved for use in our country.
Almost certainly, Yes. Our systems have been built and certified for India’s PESO, China’s NEPSI, and Russia’s GOST, and Ontario Canda’s Hydro Authority just to name a few. Our systems are built to conform to NEC, IEC, CENELEC.
Can your thermal management equipment withstand radioactive water?
Yes! Technics is quite aware of the required material selection for withstanding various levels of radiation and have been installed at particle accelerators and medical cyclotrons. We are well aware of hydrogen separation from water where we can offer recombiners in lieu of flaring.
Where are Technics systems deployed?
We have installed and commissioned our systems on 6 continents and 17 countries.
What PLC do you have experience with?
Having done this for over 30 years, we have encountered just about every platform including all of Rockwell’s Offerings, Siemens, Modicon, National Instruments, Mitsubishi, Toyoda, Automation Direct as well as GUI and SCADA systems from Rockwell, Siemens, Maple Systems, iFix, and Labview. As you can see, if we haven’t worked on a platform, we will figure it out.
What is the LOGOS System?
The LOGOS System is Technics’ platform for fluids processing and management. It is part of Technics’ control approach for demanding process environments, including blending applications that require high-resolution control, monitoring, and reporting.
Does Technics provide engineering and system integration services?
Yes. Our engineering scope includes mechanical, electrical, and software disciplines for both sub-process systems and full plant design. Its engineering work includes areas such as process development, heating and cooling loads, piping layout, flow and pressure control strategy, instrumentation selection, control panel design, and network design
Complete in-house design encompassing fluid dynamics, heat transfer, mechanical, electrical, controls, and software.
Certified Welding , Assembly, and Electrical to all Standards
Internal capabilities on a wide range of platforms.
30 Years of on-site support worldwide
- +1 (630) 938 4709
-
1000 West Crossroads Parkway
Bolingbrook, Illinois 60490